Education:
 
BS: Mechanical Engineeirng, Shiraz University, Shiraz Iran
 
MSc: Mechanical Engineeirng, Shiraz University, Shiraz Iran
 
PhD:
Mechanical Engineeirng, Shiraz University, Shiraz Iran
 
Professional Experiences:
 
1. Results for Hydraulic Model Test for Bottom-Outlet of Kamal-Saleh Dam, Pishgaman Sanat Shaya Company, Tehran, Iran, 2008.

2. Hydraulic Model Test and Vibration Study of the Bottom-Outlet of Shahriar Dam, Hydronic Sazeh Company, Tehran, Iran, 2008.

3. Hydraulic Model Test and Experimental Investigation of the Bottom-Outlet of Vaniar Dam, Aban-Sanat Company, Tehran, Iran, 2006.

4. Static, Dynamic and Vibration Analysis of a complicated space structure, Shiraz University, Iran, 2004.

5. Vibration and Hydraulic Model Test Results for Bottom-Outlet Gates, Sivand Dam, Shiraz University, Shiraz, Iran, 2004.

6. Experimental Investigation of the Vibration of a structure, Shiraz University, Iran, 2004.

7. Vibration and Hydraulic Model Test Results for Service Spillway Gates, Shirin-Darreh Dam, Shiraz University, Shiraz, Iran, 2004.

8. Hydraulic and Vibrtation Model Test Results for Bottom-Outlet, Karun III Development Project, Contract M2, Report No. KRM.M2.B1, Sadid-Tadbir Engineering and Management Co., Tehran, Iran, 1996.

9. Vibration Study of Orifice Spillway Service Gate, Karun III Development Project, Contract M2, Report No.R002.2, Sadid-Tadbir Engineering and Management Co., Tehran, Iran, 1998.

10. Result of Hydraulic Model Test for Flow Compensation Outlet, Karun III Development Project, Contract M2, Report No. KRM.R.001.1, Sadid-Tadbir Engineering and Management Co., Tehran, Iran, 1998.

11. Hydraulic Model Test of Orifice Spillway, Karun III Development Project, Contract M2, Report No. KRM.R.002, Sadid-Tadbir Engineering and Management Co., Tehran, Iran, 1997.
 
Research Areas:
 
Fluid-Structure Interaction Problems
Pliable Structures
(Inflatable Structures, Geomembrane tubes)
Numerical Methods
(FEM, Meshless Methods, Natural Element Method)
Structural Optimisation
(Genetic Algorithms, Simulated Annealing)
Dynamics and Vibrations
 
List of Publications:
 
Refereed Journal Publications

1. Ghavanloo, G. and Daneshmand, F., “Analytical analysis of the static interaction of fluid and cylindrical membrane structures”, European Journal of Mechanics/Solids, Accepted.

2. Daneshmand F. and Ghavanloo E., “Coupled free vibration analysis of a fluid-filled rectangular container with a sagged bottom membrane”, Journal of Fluids and Structures, 26, 236-252, 2010.

3. Asad Sangabi, B., Eghtesad, M., Daneshmand, F. and Vahdati, N.,"Hybrid sliding mode control of semi-active suspension systems", Smart Materials and Structures, doi:10.1088/0964-1726/18/12/125027.

4. Daneshmand F. and Kazemzadeh Parsi M. J., “Static and dynamic analysis of 2D and 3D elastic solids using the modified FGFEM”, Finite Elements in Analysis and Design, Volume 45, Issue 11, 755-765, September 2009.

5. Askari, E., Daneshmand, F., “Free vibration of an elastic bottom plate of a partially fluid-filled cylindrical container with an internal body”, European Journal of Mechanics A/Solids 29, 68–80, 2010.

6. Kazemzadeh Parsi M. J. and Daneshmand F., “Solution of geometric inverse heat conduction problems by smoothed fixed grid finite element method”, Finite Elements in Analysis and Design, Volume 45, Issue 10, 599-611, August 2009.

7. Ghavanloo, E., Daneshmand, F. “A semi-analytical approach for the nonlinear two-dimensional analysis of fluid-filled thin-walled pliable membrane tubes”. European Journal of Mechanics - A/Solids, Volume 28, Issue 3, May-June 2009, Pages 626-637.

8. Ghavanloo, E., Daneshmand, F., “The equilibrium shapes of air-filled heavy membrane tubes resting on inclined planes”, Mechanics Research Communications, Volume 36, Issue 3, April 2009, Pages 405-412.

9. Ghavanloo, E., Daneshmand, F., “Two-dimensional analytical analysis of equilibrium shape of inflated geomembrane tube resting on rigid foundation with arbitrary shape”, Geotextiles and Geomembranes, Volume 27, Issue 2, April 2009, Pages 99-106.

10. Daneshmand, F., Farid, M. and Kazemzadeh-Parsi, M.J.,” The Modified Fixed Grid Finite Element Method for 2D Linear Elastic Problems”, Esteghlal Journal of Engineering, Isfahan Technical University, 2008,(In Persian).

11. Askari, E., Daneshmand, F., “Coupled vibration of a partially fluid-filled cylindrical container with a cylindrical internal body”, Journal of Fluids and Structures, 25 (2009) 389–405.

12. N. Dialami and F. Daneshmand,” Natural Neighbour Glerkin Method for Deflection Analysis of Inflatable Structures”, Engineering Computations, 2008 (Accepted).

13. F. Daneshmand and M.J. Kazemzadeh-Parsi, “Numerical simulation of free surface potential flow problems using element free Galerkin method with a fixed nodal and integration grids”, Tarbiat Modares Journal of Science and Technology, 2008, (In Persian).

14. F. Daneshmand and M.J. Kazemzadeh-Parsi, “Complementary Integral Method for enforcing the essential boundary conditions in Element Free Galerkin Method and Its Application in Static and Dynamic Problems”, Tarbiat Modares Journal of Science and Technology, 2008 (In Persian)..

15. F. Daneshmand and S. Niroomandi,” Natural neighbour Galerkin computation of the vibration modes of fluid-structure systems”, Engineering Computations, 24(3), 2007.

16. F. Daneshmand, S. K. Sharan and M. H. Kadivar, “Finite Element Analysis of a Gate-Fluid System”, Journal of Engineering Mechanics, ASCE Journal of Engineering Mechanics, 130 (12), 1458-1466, 2004.

17. F. Daneshmand, S. K. Sharan and M. H. Kadivar, “Finite Element Analysis of Double-Free-Surface Flow through Slit in Dam”, Journal of Engineering Mechanics, ASCE, Vol. 126, No. 5, 515-523, 2000.
 
Presentation in Conferences:
 
Conference Papers

1. Ghavanloo, E. and Daneshmand, F.”Static Analysis and Equilibrium Shapes of 2D Air-Filled Geomembrane Tubes Resting on Flat and Parabolic Rigid Foundations”, 16th International and 15th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, 1165-1166, Kerman, Iran, 2008.

2. Daneshmand, F., Zare, A., Bazargan-LAri, Y., Asad-Sangabi, B. and Liaghat, T., “Numerical and Experimental Investigation of Dynamic Characteristics of the Bottom Outlet of Vaniar dam”, ASME International Mechanical Engineering Congress and Exposition, USA, October 31-November 6, 2008.

3. Daneshmand, F., Liaghat, M., Bazargan-Lari, Y. and Abdollahi,” Free Vibration Analysis of Frame Structures Using BSWI Method”, ASME International Mechanical Engineering Congress and Exposition, USA, October 31-November 6, 2008.

4. F. Daneshmand and A. Shekari, “Frequency Analysis of Fluid-Structure systems using NEM”, 19th International Congress of Mechanical Engineering, November 5-9, Brasilia, 2007.

5. M. Vahedi and F. Daneshmand, “Analysis and Optimization of Magnetorheological Damper Using Genetic Algorithm”, Proceeding of Fourth International Conference on Theoretical, Applied, Computational and Experimental Mechanics, December 27-29, India, 2007.

6. N. Dialami and F. Daneshmand, “Static Analysis of Inflatable Flat Panels Using Natural Neighbour Galerkin Method”, International Conference on Textile Composites and Inflatable Structures, 280-283, STRUCTURAL MEMBARNES, Barcelona, 2007.

7. N. Dialami and F. Daneshmand, “Deflection Analysis of Inflatable Tubes Using Natural Element Method”, International Conference on Textile Composites and Inflatable Structures, 280-283, STRUCTURAL MEMBARNES, Barcelona, 2007.

8. N. Dialami and F. Daneshmand, “Numerical Modelling and Analysis of Inflatable Space Structures in High Pressures”, 2nd National Conference on Space Structures and 1st Conference on Structures and Architectures, Tehran University, April 2007.

9. F. Daneshmand, E. Azadi Yazdi and Y. Bazargan Lari,” Hydraulic Model Test of the Bottom Outlet of Sivand Dam”, Proceedings of the 5th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics, 269-275, Athens, Greece, August 25-27, 2007.

10. F. Daneshmand, E. Azadi Yazdi and T. Liaghat,” The Hydraulic Test of the Spillway of Sivand Dam”, 5th International Conference on Dam Engineering, LNEC, Lisbon, Portugal, February 14-16, 2007.

11. F. Daneshmand, Y. Bazargan Lari,” Numerical Investigation and Hydraulic Model Test of the Bottom-Outlet of Vaniar Dam”, 5th International Conference on Dam Engineering, LNEC, Lisbon, Portugal, February 14-16, 2007.

12. K. Alagheband and F. Daneshmand, ‘Impact Analysis Using Smoothed Particle Hydrodynamics (SPH)’, 11th International and 15th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, Amir-Kabir University of Technology, 2007. (Accepted)

13. F. Daneshmand and E. Ghavanloo, “Deflection and Wrinkling Load Computation of Inflatable Beams in High Pressures Using Shakedown Theory”, 11th International and 15th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, Amir-Kabir University of Technology, 2007. (Accepted)

14. F. Daneshmand, E. Azadi and M. Shams, “Hydraulic Model Test of Flap Gate of Spillway of Shirin Darreh Dam”, 6th Internatoinal River Conference, Ahwaz, Bahman 1385. (Accepted)

15. F. Daneshmand and A. Sadeghian-Pour, The First National Specialty Conference on Gas, Shiraz University, October 30-31, 2006.

16. F. Daneshmand and S. Niroomandi, “Natural neighbour Galerkin computation of the vibration modes of fluid-structure systems”, Engineering Computations, 24(3), 2007.

17. M. Hajiazizi, N. Hataf, F. Daneshmand and A. Ghahramani, “Application of Meshless Method for Behavior Analysis of Jointed Rock Mass”, 4th Asian Rock Mechanics Symposium, Singapore, 2006.

18. M. Hajiazizi, N. Hataf, F. Daneshmand and A. Ghahramani, “Elastic-Plastic Analysis of Jointed Rock Mass Using Meshless Method”, 4th Asian Rock Mechanics Symposium, Singapore, 2006.

19. F. Daneshmand and M. J. Kazemzadeh Parsi, “Numerical simulation of free surface potential flow problems using element free Galerkin method with a fixed nodal and integration grids”, Modarres Technical and Engineering Journal, 2006. (Accepted).

20. F. Daneshmand and M. J. Kazemzadeh Parsi, “Complementary Integral Method for enforcing the essential boundary conditions in Element Free Galerkin Method and Its Application in Static and Dynamic Problems ”, Modarres Technical and Engineering Journal, No. 24, 61-78, 2006.


21. F. Daneshmand, Kh. Ghavami and M. Kazemi Miraki, “Adobes as a Low-Cost, Energy Saving Building Materials“, Brazilian Conference on Non-Conventional Materials & Technologies in Ecological and Sustainable Construction, October 29th - November 01st BRASIL NOCMAT 2006.

22. P. Khayyer, A. Zolghadr asli, F. Daneshmand and A. Najafi, “Cardiovascular disease diagnosis before birth by means of chaotic analysis on the heart rate signal”, III European Conference on Computational Mechanics, Solids, Structure and Coupled Problems in Engineering”, 6-9 June 2006, Portugal.

23. F. Daneshmand and S. Niroomandi, “Vibrational Analysis of a Fluid-Structure System Using Natural Neighbour Galerkin Method”, III European Conference on Computational Mechanics, Solids, Structure and Coupled Problems in Engineering”, 6-9 June 2006, Portugal.

24. F. Daneshmand, E. Ghavanloo and M.R. Fath-elahi, “Deflections of inflatable fabric panels subjected to concentrated loads and high internal pressure”, 10th International and 14th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, Isfahan University of Technology, 2006.

25. F. Daneshmand, Gh. Baradaran and S. Niroomandi, “Analysis of Elasto Dynamic Problems Using The Natural Element Method”, 10th International and 14th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, Isfahan University of Technology, 2006.

26. M. Taghavi, M. shams and F. Daneshmand, “ Fluid Structure Interaction Effects on Natural Frequency Analysis of thin-walled infinite shells”, 5th Iranian Hydraulic Conference, Bahonar University of Kerman, 255-262, 2005.

27. F. Daneshmand, P. Saketi and A. Khajepour, “3D finite element analysis of hydraulic engine mount including fluid-structure interaction “, Proceeding of The International Conference on Fluid Structure Interaction, 165-174, 2005.

28. M. J. Kazemzadeh Parsi, F. Daneshmand and M. Farid, “Fixed Grid Finite Element Method for 3D elasticity Problems”, 9th International and 13th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, Isfahan University of Technology, 2005.

29. F. Daneshmand, Gh. Baradaran and S. Niroomandi, “Natural Element Method in 2D elasticity problems”, 9th International and 13th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, Isfahan University of Technology, 2005.

30. F. Daneshmand, A. J. Jahromi and M. Harasani, “Vibration Analysis of Hydraulic Structures Using the Hydro-elastic Modelling”, Steel Symposium, Isfahan University, Iran, 123-131, 2004.

31. F. Daneshmand and M. J. Kazemzadeh Parsi, “Numerical Solution of Free-Surface Flow through gates Using The Element Free Galerkin Method”, 8th International and 12th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, Tarbiat Modares University, 2004.

32. F. Daneshmand, M. J. Kazemzadeh Parsi and M. Farid, “Using the Non-Boundary Fitted Grids in the Finite Element Analysis”, 8th International and 12th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, Tarbiat Modares University, 2004.

33. F. Daneshmand and M. J. Kazemzadeh Parsi, “Analysis of Double-Free Surface Flow Through Gates Using Element Free Galerkin Method”, XXI International Congress of Theoretical and Applied Mechanics, August 2004, Warsaw, Poland, 2004.

34. F. Daneshmand and M. J. Kazemzadeh Parsi ,“A Meshless Method for Free Surface Flow Through Sluice Gates”, 6th International Conference on Hydroinformatics, Singapore, 2004.

35. F. Daneshmand and M. J. Kazemzadeh Parsi, “Vibration Analysis of an Acoustic Problem using the Element Free Galerkin method”, 7th International and 11th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, Mashhad University, 921-928, 2003.

36. M. J. Kazemzadeh Parsi and F. Daneshmand, “Static Analysis of a Cantilever Beam Using the element Free Galerkin Method”, 7th International and 11th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, Mashhad University, 913-920, 2003.

37. F. Daneshmand and M. J. Kazemzadeh Parsi, “Finite Element Solution of Free-Surface Flow Through Gates”, 4th Iranian Hydraulic Conference, Shiraz University, Shiraz, Iran, 713-720, 2003.

38. M. Shams and F. Daneshmand, “A Report on the Hydraulic Model Test of Orifice Spillway of Karun III Dam”, Proceeding of International Conference on Hydraulic Structures, 2-3 May 2001, Civil Engineering Department, Bahonar University of Kerman, 1255-1264.

39. F. Daneshmand and M. H. Kadivar, “Fluid-Structure Interaction Problems and Its application in Dynamic Analysis of Radial Gates”, Proceeding of International Conference on Hydraulic Structures, 2-3 May 2001, Civil Engineering Department, Bahonar University of Kerman, 765-773.

40. F. Daneshmand, M. H. Kadivar, “Fluid Structure Interaction Problems Based on Velocity Potential Formulation”, 5th International and 9th Annual Mechanical Engineering Conference, Iranian Society of Mechanical Engineers, Guilan University.

41. F. Daneshmand, S. K. Sharan and M. H. Kadivar, “Finite Element Analysis of Double-Free-Surface Flow through Gates”, In Proceedings of the Seventeenth Canadian Congress of Applied Mechanics, Hamilton, ON: 213-214.

42. M. H. Kadivar and F. Daneshmand, “Combinatorial Optimisation of Added Masses Placement Using Genetic Algorithm”, Seventh Conference on Non-linear Vibrations, Stability and Dynamics of structures, Virginia Polytechnics and State University, Virginia, 1998.

43. M. H. Kadivar and F. Daneshmand, “Considering Stiffness Effects on Optimal Placement of tuning Masses on Structures By Genetic Algorithms”, Third International Conference on Computational Mechanics, WCCM III,1994, Japan.

44. M. H. Kadivar and F. Daneshmand, “Implementation of Simulated Annealing and Genetic Algorithm in Structural Optimization”, EUFIT Symposium, 1995, Germany.

45. M. H. Kadivar, F. Daneshmand and K. Samani, “Genetic Algorithm Approach to Composite Laminated Plate Optimization Subjected to Buckling Constraints”, 2nd International Conference in Mechanical Engineering, Shiraz, Iran, 1996.

46. M. H. Kadivar, F. Daneshmand, Sh. Setoodeh, “Band-Width Optimization By Genetic Algorithm”, 2nd International Conference in Mechanical Engineering, Shiraz, Iran, 1996.

47. M. H. Kadivar, F. Daneshmand, “Frequency Optimization Using Genetic Algorithm”, 3rd Conference in Mechanical Engineering, Amir-Kabir University, Tehran, Iran, 1996 (in Persian)
 
Research Projects:
 
1. Results for Hydraulic Model Test for Bottom-Outlet of Kamal-Saleh Dam, Pishgaman Sanat Shaya Company, Tehran, Iran, 2008.

2. Hydraulic Model Test and Vibration Study of the Bottom-Outlet of Shahriar Dam, Hydronic Sazeh Company, Tehran, Iran, 2008.

3. Hydraulic Model Test and Experimental Investigation of the Bottom-Outlet of Vaniar Dam, Aban-Sanat Company, Tehran, Iran, 2006.

4. Static, Dynamic and Vibration Analysis of a complicated space structure, Shiraz University, Iran, 2004.

5. Vibration and Hydraulic Model Test Results for Bottom-Outlet Gates, Sivand Dam, Shiraz University, Shiraz, Iran, 2004.

6. Experimental Investigation of the Vibration of a structure, Shiraz University, Iran, 2004.

7. Vibration and Hydraulic Model Test Results for Service Spillway Gates, Shirin-Darreh Dam, Shiraz University, Shiraz, Iran, 2004.

8. Hydraulic and Vibrtation Model Test Results for Bottom-Outlet, Karun III Development Project, Contract M2, Report No. KRM.M2.B1, Sadid-Tadbir Engineering and Management Co., Tehran, Iran, 1996.

9. Vibration Study of Orifice Spillway Service Gate, Karun III Development Project, Contract M2, Report No.R002.2, Sadid-Tadbir Engineering and Management Co., Tehran, Iran, 1998.

10. Result of Hydraulic Model Test for Flow Compensation Outlet, Karun III Development Project, Contract M2, Report No. KRM.R.001.1, Sadid-Tadbir Engineering and Management Co., Tehran, Iran, 1998.

11. Hydraulic Model Test of Orifice Spillway, Karun III Development Project, Contract M2, Report No. KRM.R.002, Sadid-Tadbir Engineering and Management Co., Tehran, Iran, 1997.
 
Given Seminars:
 
 
Honors and Awards:
 
2007 Best Researcher in Mechanical Engineering Department of School Engineering, Shiraz University, Shiraz, Iran

2000 Boutan award for distinguished PhD thesis from the Iranian Society of Mechanical Engineers (ISME).

1998 Visiting scholarship from the Ministry of Culture and Higher Education of Iran (Laurentian University at Sudbury in Canada)

1994 Academic award for distinguished M.Sc. student in school of engineering of Shiraz University.
 
Courses Taught:
 
• Variational Methods in Solid Mechanics
• Advanced Engineering Mathematics
• Advanced Numerical Methods
• Engineering Optimization
• Design of Machinery
• Strength of Materials
• Engineering Statics and Engineering Dynamics

  

 
 

© 1388 کلیه حقوق متعلق به دانشگاه شیراز می باشد. لطفا پیشنهادات خود را به آدرس webadmin[at]shirazu.ac.ir ارسال نمایید.